Sonax Profiline Ceramic Coating CC Plastic + Rubber

SONAX PROFILINE CeramicCoating CC Plastic + Rubber is a new type of seal based on Si-Carbon technology for refreshing and protecting unpainted plastic parts outdoors such as moldings and bumpers. The extremely flexible coating is also suitable for the care of tires and protects against fading by UV radiation. It gives the surfaces strong water and dirt repellent properties and is very easy to use. Set with 4 application pads.

• Long-term CERAMIC sealant for plastics and tyres
  
• For touching up and protecting unpainted exterior plastic parts such as mouldings, bumpers and mirror casings
  
• Flexible coating for tyre care
  
• Highly water and dirt-repellent
  
• Protects surfaces against fading due to UV rays
  
• Set with 4 application sponges
  
• Durability: up to 24 months / 30,000 km

Dose a few drops of CC Plastic + Rubber on the soft foam side of an application pad and apply thinly to the surface in small sections. Ideally, contact points are glued to the body beforehand so that no product gets on the paint. If it does happen, immediately wipe with the microfiber cloth used for preparation.
After a short exposure time of approx. Wipe 3-5 minutes of excess product with a new microfiber cloth soft touch. After that, the coating should harden for at least 6 hours. Throughout the time, the vehicle must be in a dry environment and the surfaces must no longer be touched. We recommend leaving the coating at rest for 12 hours for optimal product effects to ensure a complete reaction with the surface. Notes: Always use pH-neutral shampoos such as SONAX GlanzShampoo or SONAX Profiline ActiFoam for washing. Avoid alkaline cleaners.

PLEASE NOTE: Ensure good ventilation when processed.